MATEC Web of Conferences
Volume 33, 2015ESOMAT 2015 – 10th European Symposium on Martensitic Transformations
|Number of page(s)||4|
|Published online||07 December 2015|
Stress-induced transformation in a Ni-Mn-In alloy and the concomitant change of resistivity
1 Institute of magnetism of NASU and MESU, Vernadsky blvd., 03680, Kyiv, Ukraine
2 Institut für Werkstoffkunde (Materials Science), Leibniz Universität Hannover, An der Universität 2, D – 30823 Garbsen, Germany
3 Kotelnikov Institute of Radioengineering and Electronics of RAS, Mokhovaya 11-7, Moscow, 125009, Russia
a Corresponding author: email@example.com
In this work, the influence of mechanical stress on magnetic properties and electric resistance of a Ni-Mn-In alloy was studied. It is shown that compression of Ni-Mn-In polycrystalline specimens brings about a stressinduced martensitic transformation. Optical images recorded in-situ confirmed the formation of a martensitic structure during loading and back-transformation upon unloading. Unloading after deformation of specimens that had experienced compressive strains up to 6% resulted in full recovery of their resistivity and magnetic susceptibility. The sharp increase in the electric resistance caused by the stress-induced transformation opens up new possibilities for Ni-Mn-In alloys to be used as a material for sensors responding to mechanical stress.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.