| Issue |
MATEC Web of Conferences
Volume 33, 2015
ESOMAT 2015 – 10th European Symposium on Martensitic Transformations
|
|
|---|---|---|
| Article Number | 03009 | |
| Number of page(s) | 6 | |
| Section | NiTi-based alloys | |
| DOI | https://doi.org/10.1051/matecconf/20153303009 | |
| Published online | 07 December 2015 | |
Investigation of Ni-and Ti-content influence on microstructure and phase transformation behavior of NiTi SMA alloyed with Ag
ITASMART Group, Instituto Tecnológico de Aeronáutica, 12228-900, São José dos Campos, São Paulo, Brazil
a Corresponding author: alvares@ita.br
NiTi Shape Memory Alloys (SMA) became an interesting research field in metallurgy and physics, among many others, since its advent, back in 1960’s. Up to date, this interest remains due to the great range of unexploited research possibilities, in addition to the large number of application accessed by these alloys. Within those research possibilities, NiTi SMA has been used as the basis for new alloys by the introduction of a third, and even a forty, chemical element, what is called NiTi-based SMA. Silver addition was made via arc remelting to produce Ni54.99Ti43,01Ag2,00 and Ni52,99Ti45,01Ag2,00 wt.%, so that silver acts as a substitute for Ni in Ti-rich, as well as a substitute for Ti in Ni-rich alloys, respectively; for comparison reasons, an alloy Ni53,99Ti44,01Ag2,00, with near-equiatomic Ni:Ti relationship, was melted. Remarks on metallurgy of ingot melting, microstructure developed and thermal properties of these alloys was accessed.
© Owned by the authors, published by EDP Sciences, 2015
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.