Free Access
J. Phys. IV France
Volume 11, Number PR8, Novembre 2001
Fifth European Symposium on Martensitic Transformations and Shape Memory Alloys
Page(s) Pr8-433 - Pr8-438
Fifth European Symposium on Martensitic Transformations and Shape Memory Alloys

J. Phys. IV France 11 (2001) Pr8-433-Pr8-438

DOI: 10.1051/jp4:2001872

TEM study of the austenitic phase of high Ms CuAlNi alloys

V. Pelosin, M. Gerland, G. Covarel and A. Rivière

Laboratoire de Mécanique et de Physique des Matériaux, ENSMA, BP. 40109, 86961 Futuroscope-Chasseneuil, France

CuAlNi shape memory alloys, with Ms close to 130 °C (in the as-quenched state) have been studied on single crystalline and polycrystalline samples. The specimens have been quenched after heat treatment at 850 °C. The structural study discussed in the present paper has been performed using electrical resistivity and TEM (Transmission Electron Microscopy) analysis. The electron diffraction patterns show that the austenite of the two as-quenched samples is a disordered and body-centred cubic structure. Then, after one annealing at 165 °C performed in the TEM, the polycrystalline austenite reorders in a facecentred cubic structure (L21-type), while the single crystalline austenite (annealed at 172 °C) stays in the disordered state. Nevertheless, during the heating of the single crystal sample above AF, ordered precipitates appear in the parent phase along the former martensite- martensite interface traces. In addition, precipitates of the Cu9Al42) phase are evidenced in the two samples after annealings below 172 °C. These observations, the structural difference between the single- and the polycrystalline austenite and the low temperature precipitation of the γ2 phase, are quite original and have to be discussed by taking into consideration previous investigations performed on similar alloys.

© EDP Sciences 2001