Issue |
ESOMAT 2009
2009
|
|
---|---|---|
Article Number | 08007 | |
Number of page(s) | 7 | |
Section | Roundrobin SMA Modelling | |
DOI | https://doi.org/10.1051/esomat/200908007 | |
Published online | 17 December 2010 |
Application with the experimental results of the Roundrobin of a 3D modelling SMA based on the based on the phase transformation surface identification under proportional loading and anisothermal conditions
FEMTO-St Département de Mécanique Appliquée, 24 rue de L’Epitaphe 25000 Besançon France
Corresponding authors: a elie.gibeau@univ-fcomte.fr - b christian.lexcellent@univ-fcomte.fr - c lamine.boubakar@univ-fcomte.fr
We present a model based on the phase transformation surface of SMA. This model is described per a thermodynamical point of view. We applied this modelling on an experimental part that has been realized by P. Sittner et al. on a nickel titane wire. We had several experimental sets with we could show the performances of our model, in particular when the taking into account of the asymmetry of the yield surface and the respect of the hysteresis width.
© Owned by the authors, published by EDP Sciences, 2009