Mechanical properties of high alloyed cast and rolled CrMnNi TRIP steels with varying Ni contents
Published online: 2009-09-01
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites
Paul Rähmer, Claudia Dommaschk and Gotthard WolfSpringer Series in Materials Science, Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites 298 113 (2020)
https://doi.org/10.1007/978-3-030-42603-3_4
Numerical Simulation of the Particle Displacement during Electron Beam Welding of a Dissimilar Weld Joint with TRIP‐Matrix‐Composite
Sebastian Borrmann, Amjad Asad, Lars Halbauer, Anja Buchwalder, Horst Biermann and Rüdiger SchwarzeAdvanced Engineering Materials 21 (5) (2019)
https://doi.org/10.1002/adem.201800741
Comparative study of TRIP/TWIP assisted high density composite honeycomb structures under compressive load
C. Baumgart, D. Ehinger, C. Weigelt, L. Krüger and C.G. AnezirisComposite Structures 136 297 (2016)
https://doi.org/10.1016/j.compstruct.2015.09.053
Deformation Bands in High‐Alloy Austenitic 16Cr6Mn6Ni TRIP Steel: Phase Transformation and Its Consequences on Strain Hardening at Room Temperature
Stefan Martin, Steffen Wolf, Sabine Decker, Lutz Krüger and Ulrich Martinsteel research international 86 (10) 1187 (2015)
https://doi.org/10.1002/srin.201500005
Phosphor Alloyed CrMnNi Austenitic As‐cast Stainless Steel with TRIP/TWIP Effect
Andreas Jahn, Karl‐Philipp Steinhoff, Tobias Dubberstein, Peter Franke, Marco Weider, Steffen Wolf, Alexander Kovalev, Alexander Glage, Andreas Weiß, Wolfgang Schärfl, Klaus Eigenfeld, Lutz Krüger and Piotr R. Schellersteel research international 85 (3) 477 (2014)
https://doi.org/10.1002/srin.201300114
Biaxial in-phase and out-of-phase cyclic deformation and fatigue behavior of an austenitic TRIP steel
Stephanie Ackermann, Dirk Kulawinski, Sebastian Henkel and Horst BiermannInternational Journal of Fatigue 67 123 (2014)
https://doi.org/10.1016/j.ijfatigue.2014.02.007
Thermodynamic‐Mechanical Modeling of Strain‐Induced α′‐Martensite Formation in Austenitic Cr–Mn–Ni As‐Cast Steel
Alexander Kovalev, Marco Wendler, Andreas Jahn, Andreas Weiß and Horst BiermannAdvanced Engineering Materials 15 (7) 609 (2013)
https://doi.org/10.1002/adem.201200340
Microstructure Defects Contributing to the Energy Absorption in CrMnNi TRIP Steels
Daria Borisova, Volker Klemm, Stefan Martin, Steffen Wolf and David RafajaAdvanced Engineering Materials 15 (7) 571 (2013)
https://doi.org/10.1002/adem.201200327
SEM Investigation of High‐Alloyed Austenitic Stainless Cast Steels With Varying Austenite Stability at Room Temperature and 100°C
Horst Biermann, Johannes Solarek and Anja Weidnersteel research international 83 (6) 512 (2012)
https://doi.org/10.1002/srin.201100293
Mechanical Behavior of Deformation‐Induced α′‐Martensite and Flow Curve Modeling of a Cast CrMnNi TRIP‐Steel
Steffen Wolf, Stefan Martin, Lutz Krüger, Ulrich Martin and Ulrike Lorenzsteel research international 83 (6) 529 (2012)
https://doi.org/10.1002/srin.201100313
STT and DTT Diagrams of Austenitic Cr–Mn–Ni As‐Cast Steels and Crucial Thermodynamic Aspects of γ → α′ Transformation
Alexander Kovalev, Andreas Jahn, Andreas Weiß, Steffen Wolf and Piotr R. Schellersteel research international 83 (6) 576 (2012)
https://doi.org/10.1002/srin.201100267
A constitutive model for a high alloyed cast CrMnNi TRIP‐steel
Stefan Prüger and Meinhard KunaPAMM 11 (1) 425 (2011)
https://doi.org/10.1002/pamm.201110204
Characterization of stress–strain behavior of a cast TRIP steel under different biaxial planar load ratios
D. Kulawinski, K. Nagel, S. Henkel, et al.Engineering Fracture Mechanics 78 (8) 1684 (2011)
https://doi.org/10.1016/j.engfracmech.2011.02.021
Microstructure of austenitic stainless steels of various phase stabilities after cyclic and tensile deformation
Anja Weidner, Alexander Glage, Stefan Martin, et al.International Journal of Materials Research 102 (11) 1374 (2011)
https://doi.org/10.3139/146.110604
Observation of stacking faults in a scanning electron microscope by electron channelling contrast imaging
Anja Weidner, Alexander Glage, Lutz Sperling and Horst BiermannInternational Journal of Materials Research 102 (1) 3 (2011)
https://doi.org/10.3139/146.110448
Mechanical properties of metal matrix composites based on TRIP steel and ZrO2 ceramic foams
A. Glage, M. Weider, M. Hasterok, et al.Procedia Engineering 10 548 (2011)
https://doi.org/10.1016/j.proeng.2011.04.092
Stacking faults in high-alloyed metastable austenitic cast steel observed by electron channelling contrast imaging
A. Weidner, S. Martin, V. Klemm, U. Martin and H. BiermannScripta Materialia 64 (6) 513 (2011)
https://doi.org/10.1016/j.scriptamat.2010.11.028
Temperature Depending Influence of the Martensite Formation on the Mechanical Properties of High‐Alloyed Cr‐Mn‐Ni As‐Cast Steels
Andreas Jahn, Alexander Kovalev, Andreas Weiß, Steffen Wolf, Lutz Krüger and Piotr R. Schellersteel research international 82 (1) 39 (2011)
https://doi.org/10.1002/srin.201000228
Characterization of the TRIP/TWIP effect in austenitic stainless steels using Stress‐Temperature‐Transformation (STT) and Deformation‐Temperature‐Transformation (DTT) Diagrams
A. Kovalev, A. Jahn, A. Weiß and P. R. Schellersteel research international 82 (1) 45 (2011)
https://doi.org/10.1002/srin.201000245
Determination of the Phase Distribution in Sintered TRIP‐Matrix / Mg‐PSZ Composites using EBSD
H. Berek, A. Yanina, C. Weigelt and C. G. Anezirissteel research international 82 (9) 1094 (2011)
https://doi.org/10.1002/srin.201100064
Stress‐Temperature‐Transformation and Deformation‐Temperature‐Transformation Diagrams for an Austenitic CrMnNi as‐cast Steel
A. Kovalev, A. Jahn, A. Weiß, S. Wolf and P. R. Schellersteel research international 82 (9) 1101 (2011)
https://doi.org/10.1002/srin.201100065
Microstructure and Local Strain Fields in a High‐Alloyed Austenitic Cast Steel and a Steel‐Matrix Composite Material after in situ Tensile and Cyclic Deformation
A. Weidner, A. Yanina, S. Guk, R. Kawalla and H. Biermannsteel research international 82 (9) 990 (2011)
https://doi.org/10.1002/srin.201100087
A Material Model for TRIP‐Steels and its Application to a CrMnNi Cast Alloy
Stefan Prüger, Meinhard Kuna, Steffen Wolf and Lutz Krügersteel research international 82 (9) 1070 (2011)
https://doi.org/10.1002/srin.201100072
Ceramic Processing for TRIP‐Steel/Mg‐PSZ Composite Materials for Mechanical Applications
C. Weigelt, C. G. Aneziris, A. Yanina and S. Guksteel research international 82 (9) 1080 (2011)
https://doi.org/10.1002/srin.201100073
Dynamic and Static Softening of Sintered MgO‐PSZ / TRIP‐matrix Composites with up to 10 vol.‐% ZrO2
A. Yanina, S. Guk, W. Müller, R. Kawalla and C. Weigeltsteel research international 82 (9) 1158 (2011)
https://doi.org/10.1002/srin.201100149
Reinforcing Mechanism of Mg‐PSZ Particles in Highly‐Alloyed TRIP Steel
S. Martin, S. Richter, S. Decker, U. Martin, L. Krüger and D. Rafajasteel research international 82 (9) 1133 (2011)
https://doi.org/10.1002/srin.201100099
Computational Fluid Dynamic (CFD) Simulations of Liquid Steel Infiltration in Ceramic Foam Structures. Part II: Application to Laboratory‐Scale Experiments
J. Klostermann, R. Schwarze, M. Weider and Ch. Brückersteel research international 82 (9) 1113 (2011)
https://doi.org/10.1002/srin.201100093
Effect of austenite stability on the low cycle fatigue behavior and microstructure of high alloyed metastable austenitic cast TRIPsteels
A. Glage, A. Weidner and H. BiermannProcedia Engineering 2 (1) 2085 (2010)
https://doi.org/10.1016/j.proeng.2010.03.224