Elastohysteresis model implemented in the ﬁnite element sofware HEREZH++

Gérard Rio; Denis Favier; Yinong Liu

doi:10.1051/esomat/200908005

Open Access

Issue		ESOMAT 2009 2009


Article Number		08005
Number of page(s)		6
Section		Roundrobin SMA Modelling
DOI		https://doi.org/10.1051/esomat/200908005
Published online		17 December 2010

ESOMAT 2009, 08005 (2009)

Elastohysteresis model implemented in the ﬁnite element sofware HEREZH++

Gérard Rio¹^a, Denis Favier² and Yinong Liu³

¹ Université Européenne de Bretagne, LIMATB, Rue de Saint Maudé - BP 92116, 56321 Lorient cedex, France
² Université de Grenoble/CNRS, 3SR, BP 53, 38041 Grenoble Cedex 09, France
³ The University of Western Australia. School of Mechanical Engineering, Crawley, WA 6009, Australia

Corresponding author: ^a e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Abstract

This short paper describes the simulation results obtained with the elasto-hysteresis model implemented in the ﬁnite element software Herezh++ and compares them with the experimental data of the Roundrobin SMA Modelling benchmark.